2017
30 ausgewählte Publikationen von Mitgliedern des BPI in 2017
Tailoring the Morphology of Responsive Bioinspired Bicomponent Fibers
Gernhardt, M.; Peng, L.; Burgard, M.; Jiang, S.; Förster, B.; Schmalz, H.; Agarwal, S.
Macromol. Mater. Eng., 303, 1700248 (2017)
Bottom-Up Meets Top-Down: Patchy Hybrid Nonwovens as an Efficient Catalysis Platform
Schöbel, J.; Burgard, M.; Hils, C.; Dersch, R.; Dulle, M.; Volk, K.; Karg, M.; Greiner, A.; Schmalz, H.
Angew. Chem. Int. Ed., 56, 405 (2017)
Biobased polycarbonate as a gas separation membrane and "breathing glass" for energy saving applications
Hauenstein, O.; Rahman, Md. M.; Elsayed, M.; Krause-Rehberg, R.; Agarwal, S.; Abetz, V.; Greiner, A.
Adv. Mater. Technol., 2, 1700026 (2017)
Living Supramolecular Polymerization of a Perylene Bisimide Dye into Fluorescent J-Aggregates
Wagner, W.; Wehner, M.; Stepanenko, V.; Ogi, S.; Würthner, F.
Angew. Chem. Int. Ed., 56, 16008 (2017); Angew. Chem. Dt. Ed., 129, 16224 (2017)
A Crystalline π-Stack Containing Five Stereoisomers: Insights into Conformational Isomorphism, Chirality Inversion, and Disorder
Nowak-Król, A.; Röhr, M. I. S.; Schmidt, D.; Würthner, F.
Angew. Chem. Int. Ed 2017, 56, 11774 (2017); Angew. Chem. Dt. Ed 2017, 129, 11936 (2017)
Diketopyrrole Columnar Liquid-Crystalline Assembly Directed by Quadruple Hydrogen Bonds
Soberats, B.; Hecht, M.; Würthner, F.
Angew. Chem., 129, 10911 (2017); Angew. Chem. Int. Ed. 2017, 56, 10771 (2017)
Charge-Transfer Excitations: A Challenge for Time-Dependent Density Functional Theory That Has Been Met
Kümmel, S.
Advanced Energy Materials, 7, 1700440-1 (2017)
Exciton Transport in Molecular Aggregates – From Natural Antennas to Synthetic Chromophore Systems
Brixner, T.; Hildner R.; Köhler, J.; Lambert, C.; Würthner, F.
Adv. Energy Mater., 7, 1700236 (2017)
Constant Volume Gate-Opening by Freezing Rotational Dynamics in Microporous Organically Pillared Layered Silicates
Bärwinkel, K.; Herling, M.M.; Riess, M.; Sato, H.; Li, L.C.; Avadhut, Y.S.; Kemnitzer, T.W.; Kalo, H.; Senker, J.; Matsuda, R.; Kitagawa, S.; Breu, J.
J. Am. Chem. Soc., 139, 904 (2017)
Can high oxygen and water vapor barrier nanocomposite coatings be obtained with a waterborne formulation?
Tsurko, E.S.; Feicht, P.; Habel, C.; Schilling, T.; Daab, M.; Rosenfeldt, S.; Breu, J.
J. Membrane Sci., 540, 212 (2017a)
Large Scale Self-Assembly of Smectic Nanocomposite Films by Doctor Blading versus Spray Coating: Impact of Crystal Quality on Barrier Properties
Tsurko, E.S.; Feicht, P.; Nehm, F.; Ament, K.; Rosenfeldt, S.; Pietsch, I.; Roschmann, K.; Kalo, H.; Breu, J.
Macromolecules, 50, 4344 (2017b)
Self-Assembly of Alkoxy-Substituted 1,3,5-Benzenetrisamides Under Controlled Conditions
Weiss, D.; Kreger, K.; Schmidt, H.-W.
Macromolecular Materials and Engineering, 302, 1600390 (2017)
Manipulating Semicrystalline Polymers in Confinement
Shingne, N.; Geuss, M.; Thurn-Albrecht, T.; Schmidt, H.-W.; Mijangos, C.; Steinhart, M.; Martin, J.
Journal of Physical Chemistry B, 121(32), 7723 (2017)
Writing with Fluid: Structuring Hydrogels with Micrometer Precision by AFM in Combination with Nanofluidics
Helfricht, N.; Mark, A.; Behr, M.; Bernet, A.; Schmidt, H.-W.; Papastavrou, G.
Small, 13(31), 1700962 (2017)
Extending the Limits of Direct Force Measurements: Colloidal Probes From Sub-Micron Particles
Helfricht, N.; Mark, A.; Dorwling-Carter, L.; Zambelli, T.; Papastavrou, G.
Nanoscale, 9 (27), 9491 (2017)
Crosslinked semiconductor polymers for photovoltaic applications
Kahle, F.-J.; Saller, C.; Köhler, A.; Strohriegl, P.
Adv. Energy Mater., 7, 1700306 (2017)
Low-cost and sustainable organic thermoelectrics based on low-dimensional molecular metals
Huewe, F.; Steeger, A.; Kostova, K.; Burroughs, L.; Bauer, I.; Strohriegl, P.; Dimitrov, V.; Woodward, S. and Pflaum, J.
Adv. Mater., 29, 1605682 (2017)
Densely grafted liquid crystalline copper phthalocyanine side chain polymer: synthesis and characterization
Heinrich, C.D.; Tuncel Kostakoglu, S. & Thelakkat, M.
J. Mater. Chem. C, 5, 6259 (2017)
π-Conjugated Donor Polymers: Structure Formation and Morphology in Solution, Bulk and Photovoltaic Blends
Hildner, R.; Köhler, A.; Müller-Buschbaum, P.; Panzer, F. & Thelakkat, M.
Advanced Energy Materials, 7, 1700314 (2017)
Real-Time Direct Observation of Lodide Ion Migration in Methylammonium Lead Halide Perovskites
Li, C.; Guerrero, A.; Zhong, Y.; Gräser, A.; Melo Luna, C.; Köhler, J.; Bisquert, J.; Hildner, R.;
Hüttner, S.
Small, 13, 1701711 (2017)
Synergistic Effects of Janus Particles and Triblock Terpolymers on Toughness of Immiscible Polymer Blends
Bahrami, R.; Löbling, T.; Gröschel, A.H.; Schmalz, H.; Müller, A.H.E.; Altstädt, V.
Polymer, 109, 229 (2017)
Improved compression properties of polypropylene extrusion foams by supramolecular additives
Mörl, M.; Steinlein, C.; Kreger, K.; Schmidt, H.-W.; Altstädt V.
Journal of Cellular Plastics, 0, 1 (2017)
Understanding Flame-Retardant Grades Better
Sarabi, B.; Drummer, D.
Kunststoffe International, 10, 84 (2017)
Adhesion and metabolic activity of human corneal cells on PCL based nanofiber matrices
Stafiej, P.; Küng, F.; Thieme, D.; Czugala, M.; Kruse, F. E.; Schubert, D. W.; Fuchsluger, T. A.
Materials Science and Engineering: C, 71, 764 (2017)
Electrical conductivity and mechanical properties of melt-spun ternary composites comprising PMMA, carbon fibers and carbon black
Qu, M.; Nilsson, F.; Qin, Y.; Yang, G.; Pan, Y; Liu, X.; Rodriguez, G. H.; Chen, J.; Zhang, C.;
Schubert, D. W.
Composites Science and Technology, 150, 24 (2017)
A one-step approach for multimodal functionalization of electrospun nanofibers and their application for immune-regulatory surfaces
Wistlich, L.; Kums, J.; Heffels, K.-H.; Wajant, H.; Groll, J.
Advanced Functional Materials, 27, 1702903 (2017)
Thiol-ene Clickable Gelatin: a Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S.; Brown, G.; Lim, K. S.; Juengst, T.; Boeck, T.; Blunk, T.; Tessmar, J.; Hooper, G. J.;
Woodfield, T.; Groll, J.
Advanced Materials, 29, 1703404 (2017)
Recombinant spider silk-based bioinks
DeSimone, E.; Schacht, K.; Pellert, A.; Scheibel, T.
Biofabrication, 9, 044104 (2017)
Surface features of recombinant spider silk protein eADF4(κ16)-made materials are well-suited for cardiac tissue engineering
Petzold, J.; Aigner, T.; Touska, F.; Zimmermann, K.; Scheibel, T.; Engel, F.
Adv. Funct. Mat., 27, 1701427 (2017)
Characterization of hydrogels made of a novel spider silk protein eMaSp1s and evaluation for 3D printing
Thamm, C.; DeSimone, E.; Scheibel, T.
Macromolecular Bioscience, 17, 1700141 (2017)