Druckansicht der Internetadresse:

Logo UNI-Bayereuth Logo Friederich-Alexander Universität Logo Universtität Würzburg

Seite drucken

Prof. Dr.-Ing. Michael Schmidt

zurück zur Übersicht
zurück zur Übersicht
Michael Schmidt Prof. Dr.-Ing. Michael Schmidt
Michael Schmidt

Lehrstuhl für Photonische Technologien
Universität FAU Erlangen-Nürnberg


Berufserfahrung

seit 2009Leiter des Instituts (Ordinarius)
Lehrstuhl für Photonische Technologien, Friedrich-Alexander-Universität Erlangen-Nürnberg
seit 2005

Geschäftsführer
Bayerisches Laserzentrum GmbH (blz)
Geschäftsführer: Prof. Dr.-Ing. Michael Schmidt, Dr.-Ing. Stephan Roth

2002 – 2004Prokurist
Bayerisches Laserzentrum GmbH (blz)
Geschäftsführer: Prof. Dr.-Ing. Dr.-Ing. E.h. mult. Dr. h.c. mult. Manfred Geiger, Dr.-Ing. Gerd Eßer
2001 – 2004Bereichsleiter Entwicklung / Fertigung
Bayerisches Laserzentrum GmbH (blz)
Geschäftsführer: Prof. Dr.-Ing. Dr.-Ing. E.h. mult. Dr. h.c. mult. Manfred Geiger, Dr.-Ing. Gerd Eßer
1997 – 2000Wissenschaftlicher Mitarbeiter
Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Fertigungstechnologie    
Leiter des Instituts: Prof. Dr.-Ing. Dr.-Ing. E.h. mult. Dr. h.c. mult. Manfred Geiger

Ausbildung

02/2002Dissertation / PhD (Dr.-Ing.)
Titel: "Prozessregelung für das Laserstrahl-Punktschweißen in der Elektronikproduktion", Friedrich- Alexander-Universität Erlangen-Nürnberg, Prof. Dr.-Ing. Dr.-Ing. E.h. mult. Dr. h.c. mult. Manfred Geiger
1989 – 1996Ingenieurwesen, Elektrotechnik, Friedrich-Alexander-Universität Erlangen-Nürnberg

Auszeichnungen

2003Promotionspreis für die Promotion „Prozessregelung für das Laserstrahl-Punktschweißen in der Elektronik¬produktion“
Technische Fakultät der Friedrich-Alexander-Universität Erlangen-Nürnberg gestiftet vom Rotary Club Erlangen-Nürnberg
2004

2. Platz im Wettbewerbsfeld „Anwendungsnahe Wissenschaft“ des Innovationspreis Lasertechnik
Arbeitskreis Lasertechnik e. V.

Verantwortlichkeiten

International

seit 2014

Mega Grant (Presidential Grant) in Russia 


Build up a laboratory on Additive Technology with KAI - Kazan University
seit 2011

INO - Institute National d’Optique, Québec, Canada

Associate Researcher

 

Member of R&D Advisory Committee
seit 2009

Laser Demonstration Center (LDC), Sankt Petersburg

 
Advisory Board
2013 – 2015CIRP
Chairman Collaborative Working Group: Laser in Production
2013 – 2016STC-E: Secretary
seit 2016STC-E: Vice Chairman
2014 – 2017Associate Member
2010 – 2012LIA Laser Institute of America
2014 – 2016Committee ICALEO: Laser-Micro-Fabrication Conference
2017 – 2019Member of the Board of Directors
seit 2011SPIE
Student Chapter in University of Erlangen-Nürnberg: Advisor
seit 2012Journal of Laser Micro and Nanoengineering (JLMN)
Editor
seit 2010International Journal of Optomechatronics
Associate Editor
2015 – 2016Journal Optics and Laser Technology
Associate Editor
seit 2016Receiving Editor
seit 2011LPM - Laser Precision Microfabrication conference of JLPS Japan Laser processing Society
Program Committee
seit 2017Fellow Conference Co-Chair
seit 2012CLEO Conference on Lasers and Electro-Optics
Program Committee (Applications & Technology 04: Industrial Subcommittee)
seit 2012ISEM-XVII - International Symposium for Electro-Machining
Scientific Committee
2014 und 2016Annual International Conference of RAPDASA, the Rapid Product Development Association of South Africa
Organizing Committee
2015VRAP International Conference on Advanced Research in Virtual and Rapid Prototyping
Scientific Committe
2016IAMA International Additive Manufacturing Award 2016
Member of the Jury
2018ICAFT / SFU / AutoMetForm Conference
Scientific Committee
2019SheMet Conference
International Scientific Committee
2019THE A coatings Conference
International Scientific Program Committee

National


2010 – 09/2013SAOT - Graduate School in Advanced Optical Technologies in the excellence initiative of the DFG (German Research Foundation)
Co-Coordinator
seit 10/2013Coordinator
2017 – 2018WLT Wissenschaftliche Gesellschaft Lasertechnik e. V. (AG Ing.) 
President
LiM Conference: General Chair 2011, Sub-Chair (2009, 2013, 2017, 2019)
seit 2007bayern photonics e. V., München
Chairman of the Board
seit 2012Group "networking research", Bavaria
Vice chairman
seit 2014BFS: Bayerische Forschungsstiftung
ForNextGen: Collaborative Research Project: Chairman
seit 2007LANE - Laser Assisted Net Shape Engineering Conference
Organizer / Chairman
seit 2012EDPC-Conference
International Conference Committee
2017IWOTE 2017 - 5th International Workshop on Thermal Forming and Welding Distortion
Advisory Committee
seit 2017Acatech – Deutsche Akademie der Technikwissenschaften e. V.
Member
Michael Schmidt

Lehrstuhl für Photonische Technologien
Universität FAU Erlangen-Nürnberg


10 ausgewählte Publikationen

Eine vollständige Publikationsliste von Prof. Dr.-Ing. Michael Schmidt finden Sie hier.


A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties
Stichel, T.; Frick, T.; Laumer, T.; Tenner, F.; Hausotte, T.; Merklein, M.; Schmidt, M.
Optics & Laser Technology, Vol. 89, 2017, pp. 31-40         

Fundamental investigation of laser beam melting of polymers for additive manufacture
Laumer, T.; Wudy, K.; Drexler, M.; Amend, P.; Roth, S.; Drummer, D.; Schmidt, M.
Journal of Laser Applications, Vol. 26, 2014, Issue 3

Thermal joining of thermoplastic metal hybrids by means of mono- and polychromatic radiation
Amend, P.; Pfindel, S.; Schmidt, M.
Lasers in Manufacturing Conference 2013, Physics Procedia Vol. 41, 2013, pp. 98-105

Experimental and Simulative Investigation of Laser Transmission Welding under Consideration of Scattering
Devrient, M.; Da, X.; Frick, T.; Schmidt, M.
Laser Assisted Net Shape Engineering 7 (LANE 2012), Physics Procedia Vol. 39, pp.117-127

Laser transmission welding of optical transparent thermoplastics
Devrient, M.; Frick, T.; Schmidt, M.
Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing, 23.-26.05.2011, München, Part 1, S.157-165     

A fast and flexible method for manufacturing 3D molded interconnect devices by the use of a rapid prototyping technology
Amend, P.; Pscherer, C.; Rechtenwald, T.; Frick, T.; Schmidt, M.
Proceedings of the 6th LANE2010 Laser Assisted Net Shape Engineering, Erlangen, 21.-24.09.2010, Physics Procedia Volume 5, Part 2, S. 561-572, Elsevier B.V. Amsterdam, 2010 

Optical properties of plastics and their role for the modelling of the laser transmission welding process
Geiger, M.; Schmidt, M.; Frick, T.
WGP-Annalen 2008 “Production Engineering – Research and Development”, Springer-Verlag GmbH, Heidelberg, Vol. 3/1, 2009, S. 49-55    

In Vivo Evaluation of ß-TCP Containing 3D Laser Sintered Poly(ether ether ketone) Composites in Pigs von Wilmonsky, C.; Lutz, R.; Meisel, U.; Srour, S.; Rupprecht, S.; Toyoshima, T.; Nkenke, E.; Schlegel, K. A.; Pohle, D.; Munstedt, H.; Rechtenwald, T.; Schmidt, M.
Journal of Bioactive and Compatible Polymers, 24/2, 2009, S. 169-184

Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro
von Wilmowsky, C.; Vairaktaris, E.; Pohle, D.; Rechtenwald, T.; Lutz, R.; Münstedt, H.; Koller, G.; Schmidt, M.; Neukam, F. W.; Schlegel, K. A.; Nkenke; E.
Journal of Biomedical Materials Research - Part A, Wiley InterScience, Vol. 87A/4, 2008, S. 896-902

Selective Laser Sintering of PEEK
Schmidt, M.; Rechtenwald, T.; Pohle, D.
CIRP Annals - Manufacturing Technology, Vol. 56/1, 2007, S. 205-208

Michael Schmidt

Lehrstuhl für Photonische Technologien
Universität FAU Erlangen-Nürnberg


Prof. Dr.-Ing. Michael Schmidt
Universität Erlangen-Nürnberg

Konrad-Zuse-Straße 3/5
91052 Erlangen

Telefon: +49 9131 85 23366
Homepage: Lehrstuhl für Photonische Technologien

Kontakt